Please note: How this is done may vary depending on the make and model. One method is shown below:
How is the blade attached?
A double-sided veneer saw has a wooden handle with a metal plate attached to the end of it. The double-sided blade is mounted on this plate and secured with two screws. A double-sided veneer saw viewed from the back.
Removing the blade
Step 1 – Loosen and remove screws
Loosen and remove the two screws holding the blade to the backing plate.
Step 2 – Pull blade away
Pull the blade away from the backing plate and set aside.
Installing the blade
Step 1 – Loosen and remove screws
Loosen and remove the two screws on the backing plate.
Step 2 – Place blade onto backing plate
Align the two holes on the blade with the two on the backing plate and insert and tighten the two screws.