Flexible magnetic tape can be attached to both ferromagnetic materials and non-ferromagnetic materials. To do this you will need to do the following:
Step 1 – Measure flexible magnetic tape
Roll out the flexible magnetic tape until you have the required amount.
Step 2 – Cut flexible magnetic tape
The best way to cut flexible magnetic tape to the required size is using a pair of scissors.
Some rolls of flexible magnetic tape do not need to be cut as they come scored at regular intervals along the magnet which allows each piece to be pulled off. This makes the tape quick to use, however it is only useful if you are using a single sized piece of flexible magnetic tape.
Step 3 – Attach flexible magnetic tape
If the flexible magnetic tape has a laminated magnetic face then you will need to place the piece of magnetic tape directly over the area of ferromagnetic material. The flexible magnetic tape will then attach itself to the ferromagnetic surface.
On the other hand, if your flexible magnetic tape has an adhesive backing, you will need to peel off the backing tape to attach it to a non-ferromagnetic material.