How to attach a fixed multi angle weld clamp magnet
Step 1 – Place material onto magnet
Place the pieces of material onto either side of the corner of your weld clamp magnet which can achieve the angle you require.
Step 2 – Place metal between plates
The metal pieces that are to be welded together can either fit within the gap created by two metal plates or they can stick to the main surface of the magnet.
If the magnet has an on/off switch, turn the magnet on to hold the two pieces of material together when they are in the correct position.
When you need to remove the magnet from the joint, simply turn the magnet off first.
How to remove a fixed multi angle weld clamp magnet
Remove the magnets by knocking them off the joint with a rubber headed mallet.