how-do-you-adjust-the-cutting-depth-on-a-brick-rake

How to adjust the cutting depth on a brick rake

Shop for Brick Rakes
brick rake already assembled Brick rakes come already assembled; it is just down to you to adjust the depth of the pin that rakes out the mortar.
 To do so - unscrew by hand the spade bolt and lift or lower the robust pin to the depth you wish to rake

Step 1 – Loosen spade bolt

Unscrew the spade bolt by turning it anti-clockwise by hand and then lift or lower the pin to the desired depth you wish to rake.

The distance between the bottom of the wheels and the tip of the pin will indicate the maximum raking depth. You can measure this with a tape measure for accuracy.

Step 2 – Tighten spade bolt

When you have set the required depth, tighten the spade bolt by turning it clockwise by hand. You are ready to go!

Wonkee Donkee says: 'Remember - righty tighty, lefty loosey!'