Our other sites:

What is a threaded rod cutter used for?

Shop for Threaded Rod Cutters

threaded rod cutter Threaded rod cutters are designed to cut soft steel.
rods not to be cut by Rodcut They are not designed to cut plastic, hardened steel, stainless steel rods or un-threaded rods.
sizes of rod suitable Threaded rod cutter dies have either a single slot, two slots, or three slots. They are generally interchangable and most models will include a selection of slot sizes.

Some three slot dies can cut four sizes of rod: the M6, M7, M8 and M10. These have diameters of 6, 7, 8 and 10mm respectively. There is a 6, 8 and 10mm slot. The 7mm rods are cut in the 10mm slot.

soft steel threaded rod  Threaded rod cutters can generally cut up to 6.6 soft steel: 60 kg/mm².

tensile testing diagram The rating 6.6 soft steel: 60Kg/mm2 refers to the rod’s tensile strength. Tensile strength is the amount of stress/pressure the material can withstand before it breaks.

The various types of steel usually measure in between 40-80kg/mm2.