To use the bolt removers you will need a power drill and the correct size bolt remover.
Step 1 – Attach bolt remover to drill
Insert the bolt remover of your choice into the chuck of the drill.
Step 2 – Set drill to reverse
Set the drill to reverse or anti-clockwise.
Step 3 – Centre bolt remover
Place the tip of the bolt remover as close as you can to the centre of the bolt, screw or fastener.
Step 4 – Drill
Squeeze the trigger of the drill to create a hole. Keep checking you are constantly drilling at the centre; then as the extractor drills deeper it will eventually grab onto the object you are removing.
Step 5 – Extract
Press the trigger of the drill until the object being extracted is completely removed.