How to load a pointing and grouting gun

Shop for Pointing and Grouting Gun

Step 1 – Push trigger-release lever

Push the trigger-release lever and pull the plunger arm back.

Step 2 – Remove tube

Remove the tube from the frame and attach your required nozzle. The nozzle should fit tightly and securely over the end of the tube.

Remember to cut the nozzle to the right size if necessary.

Step 3 – Fill tube

Fill the tube with your desired material.

Step 4 – Insert full tube

Insert the newly-filled tube back into the applicator frame, placing the nozzle-end in first.

Step 5 – Align tube

Align the end of the tube with the plunger and while holding down the trigger-release lever, push the plunger forward into the tube.

Step 6 – Squeeze trigger

Let go of the trigger-release lever and squeeze the trigger repeatedly until the plunger comes into contact with the mixture in the tube.