Power Tool Accessories

Back top top

1-18 of 23

  1. Page 1 of 2
  1. 620/4WS Countersink
    SKU: TRE6204WS

    620/4WS Countersink

    £8.46 Excl. VAT £10.15 Incl. VAT

    For use with 4 mm drill bit (not included).

    Learn More
  2. SNAP/QC Quick Chuck
    SKU: TRESNAPQC

    SNAP/QC Quick Chuck

    £9.50 Excl. VAT £11.40 Incl. VAT

    The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the

    Learn More
  3. DWS/LF/100 Lapping Fluid 100ml
    £9.11 Excl. VAT £10.93 Incl. VAT

    Trend Lapping Fluid is designed solely for the engineering industry. It is ideal for use with diamond abrasives, where other

    Learn More
  4. Craftpro Credit Card Sharpening Stone
    £10.51 Excl. VAT £12.61 Incl. VAT

    The Trend CR/DWS/CC/FC is a double sided credit card size diamond stone. It has monocrystalline diamonds for fast, clean,

    Learn More
  5. 63127 Collet Sleeve 6.35mm to 12.7mm
    £10.29 Excl. VAT £12.35 Incl. VAT

    The TRE63127 Collet Sleeve has the following specifications: Diameter: 12.7mm (1/2in)Internal Bore 6.35mm (1/4in)Bore: 8mm.Overall

    Learn More
  6. GB160 Guide Bush 16mm Dia
    £10.29 Excl. VAT £12.35 Incl. VAT

    Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other

    Learn More
  7. 8127 Collet Sleeve 8mm to 12.7mm
    £10.29 Excl. VAT £12.35 Incl. VAT

    The TRE8127 Collet Sleeve has the following specifications:Diameter: 12.7mm (1/2in).Bore: 8mm.Overall length: 30mm.

    Learn More
  8. SNAP/MAG Magnetic Holder For Screws
    £8.49 Excl. VAT £10.19 Incl. VAT

    Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring.

    Learn More
  9. KWJ/Pin/4 10mm Pin Pack (4 Piece)
    £8.46 Excl. VAT £10.15 Incl. VAT

    This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic

    Learn More
  10. SNAP/PC/38 Plug Cutter 3/8in
    £9.50 Excl. VAT £11.40 Incl. VAT

    For cutting 3/8 inch (9.5mm) Plugs.

    Learn More
  11. SNAP/FLIP/SET 4pc Flip Driver Set
    £11.98 Excl. VAT £14.38 Incl. VAT

    A four piece drill countersinking and screwdriving flip over set.

    Learn More
  12. T420/35 x 8mm TCT Hinge Sinking 35mm Diameter
    £9.71 Excl. VAT £11.65 Incl. VAT

    Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine

    Learn More
  13. Arbor Standard Duty 33/60 x 1/4
    £11.98 Excl. VAT £14.38 Incl. VAT

    For use with Trend bearings and slotters. 1/4in shank. Includes: 1 x Arbor1 x Spacer 5mm3 x Spacer 3mm

    Learn More
  14. 3/21 x 1/4 HSS Two Flute Cutter 6.3mm x 28mm
    £10.77 Excl. VAT £12.92 Incl. VAT

    Use High Speed tooling when working with softwoods such as Pine. H.S.S Tooling1/4in Shank.C = 28 mmD = 6.3 mm 1/4 in

    Learn More
  15. C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm
    £11.23 Excl. VAT £13.48 Incl. VAT

    Diameter - 1/8in 3.2mmCutting Length - 3/8in 9.5mmT.C.T. 2 Flutes.

    Learn More
  16. C014 x 1/4 TCT Two Flute Cutter 9.5mm x 25.4mm
    £9.76 Excl. VAT £11.71 Incl. VAT

    D1 3/8 inch D1 9.5 mm Cut length 1 inch Cut length 25.4 mm Shank Diameter 1/4 inch

    Learn More
  17. C012A x 1/4 TCT Two Flute Cutter 8.0mm 25.0mm
    £9.28 Excl. VAT £11.14 Incl. VAT

    The Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating

    Learn More
  18. C024 x 1/4 TCT Two Flute Cutter 15.0mm x 25.4mm
    £11.98 Excl. VAT £14.38 Incl. VAT

    The Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, grooving, rebating

    Learn More

Back top top

1-18 of 23

  1. Page 1 of 2
Contact Us