PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel.
Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lowest of the group. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.
Plain finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet.
Will also fit GF33PT-E, GF33PT-U.
Gauge/Diameter (mm) 3.1
Clipped Head 33°
Description Plain Smooth Shank 3.1 x 90mm Nails
Qty per box 2200