Other Power Tool Accessories

Back top top

1-18 of 33

  1. Page 1 of 2
  1. Wheel Brush D125mm x W20-22 x 40 Bore Set 2 Steel Wire 0.30
    £13.29 Excl. VAT £15.95 Incl. VAT

    Diameter. 125mm.Width. 20-22mm.Min/Max Bore: 13/40mm.Wire Gauge. 0.30/0.35.Wire Type. Steel Crimped.Max R.P.M.6,000

    Learn More
  2. Cup Brush 100mm M14 x 0.35 Steel Wire
    £15.78 Excl. VAT £18.94 Incl. VAT

    Diameter. 100mm.Wire Height. 30mm.Bore. M14.Wire Gauge. 0.35. Wire Type. Steel.Max. R.P.M. 8,500.

    Learn More
  3. X66301 Male Chuck & Key 13mm
    £14.93 Excl. VAT £17.92 Incl. VAT

    13mm capacity (3/8 inch) Male Threaded drill chuck complete with key. Chuck thread: 3/8 inch x 24unf

    Learn More
  4. X66321 Female Chuck & Key 13mm
    £14.93 Excl. VAT £17.92 Incl. VAT

    13mm capacity 1/2 inch Female Threaded drill chuck complete with key Chuck thread: 1/2 inch x 20unf

    Learn More
  5. PRIMA 13mm Keyed Drill Chuck Female Mount 1/2 x 20
    £14.08 Excl. VAT £16.90 Incl. VAT

    13mm Cap - 1/2 x 20 Female

    Learn More
  6. Flexible Drive Shaft 1.1m 6mm Capacity
    £14.16 Excl. VAT £16.99 Incl. VAT

    A 1.1m (43in) long flexible drive shaft that will fit directly into the chuck of any cordless or electric power drill. The

    Learn More
  7. SDS Max Steel Point 400mm
    SKU: DEWDT6821QZ

    SDS Max Steel Point 400mm

    £13.49 Excl. VAT £16.19 Incl. VAT

    The DEWALT DEWDT6821QZ SDS Max Steel Point has the following dimensions:Length: 400mm

    Learn More
  8. SDS Max Steel Flat 25 x 400mm
    £13.49 Excl. VAT £16.19 Incl. VAT

    The DEWALT DEWDT6823QZ SDS Max steel flat has the following dimensions:Width: 25mmLength: 400mm

    Learn More
  9. Knot End Brush with Shank 29mm x 0.35 Steel Wire
    £15.64 Excl. VAT £18.77 Incl. VAT

    The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.

    Learn More
  10. General Purpose Grinding Wheel 200 x 25mm Coarse Alox
    £12.69 Excl. VAT £15.23 Incl. VAT

    Wheel Size: 200mm x 25mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350

    Learn More
  11. General Purpose Grinding Wheel 200 x 20mm Green Grit
    £14.84 Excl. VAT £17.81 Incl. VAT

  12. General Purpose Grinding Wheel 200 x 25mm Medium Alox
    £12.69 Excl. VAT £15.23 Incl. VAT

    Wheel Size: 200mm x 25mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350

    Learn More
  13. General Purpose Grinding Wheel 200 x 25mm Fine Alox
    £12.69 Excl. VAT £15.23 Incl. VAT

    Wheel Size: 200mm x 25mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350

    Learn More
  14. GRAB/SE1/SET Grabit Remover Set 2 Piece
    £13.29 Excl. VAT £15.95 Incl. VAT

    Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from

    Learn More
  15. SDS-plus Steel Gouge/Hollow Chisel 22 x 240mm
    £14.47 Excl. VAT £17.36 Incl. VAT

    1 x DEWALT SDS-plus Steel Gouge/Hollow Chisel 22mm Length 240mm

    Learn More
  16. SDS-plus Steel Tile/Scaling Chisel 40 x 200mm
    £13.27 Excl. VAT £15.92 Incl. VAT

    1 x DEWALT SDS-plus Steel Tile/Scaling Chisel 40mm Length 200mm

    Learn More
  17. SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm
    £14.27 Excl. VAT £17.12 Incl. VAT

    Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications: D1

    Learn More
  18. Morse Taper Arbor 4MT Series 3JT Arbor
    £15.21 Excl. VAT £18.25 Incl. VAT

Back top top

1-18 of 33

  1. Page 1 of 2
Contact Us