Other Power Tool Accessories

Back top top

1-18 of 23

  1. Page 1 of 2
  1. Wire Cup Brush 75mm x M14 x 2 Stainless Steel 0.30mm
    £4.51 Excl. VAT £5.41 Incl. VAT

    Wire: Stainless Steel Type: Cup Face Diameter: 75mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1

    Learn More
  2. Wire Cup Brush 100mm x M14 x 2 0.30mm
    £4.84 Excl. VAT £5.81 Incl. VAT

    Wire: Steel Type: Cup Face Diameter: 100mm Thread: M14 x 2 Wire: 0.3mm Conforms to ISO 9001 and DIN EN1083-1 and 2

    Learn More
  3. Chuck & Key 13mm Capacity 1/2 x 20 UNF Thread
    £4.82 Excl. VAT £5.78 Incl. VAT

    The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the

    Learn More
  4. Chuck Keyless Impact 10mm Capacity 3/8 x 24 UNF
    £4.04 Excl. VAT £4.85 Incl. VAT

    The Faithfull Keyless Chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck

    Learn More
  5. SDS Square Drive Adaptor Set 3 Piece
    £4.56 Excl. VAT £5.47 Incl. VAT

    These handy adaptors will convert your SDS drill into a useful tool for setting and removing nuts, bolts and coach bolts.

    Learn More
  6. Wire Brush Shaft Mounted 70mm x 25mm 0.30mm
    £4.56 Excl. VAT £5.47 Incl. VAT

    Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and

    Learn More
  7. SDS Max Point 300mm
    SKU: FAIMAXP300

    SDS Max Point 300mm

    £5.70 Excl. VAT £6.84 Incl. VAT

    FAIMAXP300 Length: 300 mm

    Learn More
  8. SDS Max Chisel 300mm
    SKU: FAIMAXC300

    SDS Max Chisel 300mm

    £5.77 Excl. VAT £6.92 Incl. VAT

    FAIMAXC300Length: 300 mm Width: 25 mm

    Learn More
  9. General Purpose Grinding Wheel 125 x 13mm Fine Alox
    £4.88 Excl. VAT £5.86 Incl. VAT

    Wheel Size: 125mm x 13mm x 19.05mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 5,350

    Learn More
  10. General Purpose Grinding Wheel 125 x 13mm Medium Alox
    £4.88 Excl. VAT £5.86 Incl. VAT

    Wheel Size: 125mm x 13mm x 19.05mmGrit: 46Bond Hardness: PM/S: 3Max R.P.M: 5,350

    Learn More
  11. Diamond Wheel Dresser 0.25 Carat
    £5.12 Excl. VAT £6.14 Incl. VAT

    Tip: 0.25 Carat Diamond.Suitable for bench grinding wheels of up to 150mm diameter.

    Learn More
  12. General Purpose Grinding Wheel 125 x 13mm Coarse Alox
    £4.88 Excl. VAT £5.86 Incl. VAT

    Wheel Size: 125mm x 13mm x 19.05mmGrit: 36Bond Hardness: M Center bore size 19.05mm, supplied with 12.7mm reducing bush.M/S:

    Learn More
  13. Wire Cup Brush Twist Knot 65mm M10 x 0.50mm Steel Wire
    £4.18 Excl. VAT £5.02 Incl. VAT

    Face Diameter: 65mm Thread: M10 x 1.25 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.

    Learn More
  14. Wire Cup Brush Twist Knot 65mm M10 x 0.50mm Steel Wire
    £4.20 Excl. VAT £5.04 Incl. VAT

    Face Diameter: 65mm Thread: M10 x 1.5 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.

    Learn More
  15. Wire Cup Brush Twist Knot 65mm M14 x 0.50mm Steel Wire
    £4.20 Excl. VAT £5.04 Incl. VAT

    Face Diameter: 65mmThread: M14 x 2Wire: 0.5mmConforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 12,500.

    Learn More
  16. Conical Wire Brush 115mm M14 Bore 2 0.50mm Wire
    £4.73 Excl. VAT £5.68 Incl. VAT

    Type: Knot conical Diameter: 115 mmThread: M14 x 2Wire: 0.5 mm twist knot steelConforms to ISO 9001. and DIN EN1083-1 and

    Learn More
  17. Conical Wire Brush 100mm M14 Bore 0.50mm Wire
    £4.02 Excl. VAT £4.82 Incl. VAT

    Diameter: 100 mmThread: M14 x 2Wire: 0.5 mm twist knot steelConforms to ISO 9001. and DIN EN1083-1 and 2

    Learn More
  18. Conical Wire Brush 100mm M10 Bore 1.5 0.50mm Wire
    £4.02 Excl. VAT £4.82 Incl. VAT

    Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1

    Learn More

Back top top

1-18 of 23

  1. Page 1 of 2
Contact Us