Power Tool Accessories

Back top top

1-18 of 29

  1. Page 1 of 2
  1. 6200/8 HS Countersink Set
    £13.80 Excl. VAT £16.56 Incl. VAT

    NOT SUITABLE FOR FERROUS AND NON FERROUS METALS.H.S.S.No.8 Woodscrew.Diameter. 5/8in.Drill Diameter. 3/16in.O/L 1.1/4in.

    Learn More
  2. Loc/blk/pk1 Loc Block Support Pack (Anti-Slip)
    £14.28 Excl. VAT £17.14 Incl. VAT

    The Trend Loc block workpiece is a pack of four interlocking gripping blocks that lock together to allow the workpiece to

    Learn More
  3. Craftpro Folding Sharpening Stone
    £15.81 Excl. VAT £18.97 Incl. VAT

    The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast,

    Learn More
  4. Universal Sub Base C/w Pins & Bush
    £17.70 Excl. VAT £21.24 Incl. VAT

    The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly

    Learn More
  5. GRAB/SE1/SET Grabit Remover Set 2 Piece
    £13.69 Excl. VAT £16.43 Incl. VAT

    Double ended screw removers for use with a reversible drill to remove damaged screws, machine screws and broken bolts from

    Learn More
  6. SNAP/PC/12 Plug Cutter 1/2in
    £12.10 Excl. VAT £14.52 Incl. VAT

    For cutting 1/2 inch (12.7mm) Plugs

    Learn More
  7. SNAP/CB/3TC TCT Tipped Counterbore 4.75 x 12.7mm
    £14.69 Excl. VAT £17.63 Incl. VAT

    Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Specifications: D1

    Learn More
  8. SNAP/HKLC/6 Keyless Chuck
    SKU: TRESNAPHKLC6

    SNAP/HKLC/6 Keyless Chuck

    £12.59 Excl. VAT £15.11 Incl. VAT

    The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up

    Learn More
  9. PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm
    £14.73 Excl. VAT £17.68 Incl. VAT

    This replacement stepped drill bit for the Pocket Hole Jig has a diameter of 9.5mm (3/8in).

    Learn More
  10. 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm
    £17.07 Excl. VAT £20.48 Incl. VAT

    Dimensions:Shank: 1/4inCutting Diameter (D): 1.5mmCutting Length (C): 6.0mm

    Learn More
  11. 2/3 x 1/4 TCT Single Flute Cutter 4.0 x 11.0mm
    £15.12 Excl. VAT £18.14 Incl. VAT

    Dimensions:Shank: 1/4inCutting Diameter (D): 4.0mmCutting Length (C): 11.0mm

    Learn More
  12. 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm
    £16.61 Excl. VAT £19.93 Incl. VAT

    Combination pierce and trim cutters. These cutters pierce and cut out aperture in laminate worktops. The base of the cutter

    Learn More
  13. 46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm
    £17.07 Excl. VAT £20.48 Incl. VAT

    Tooling Tungsten Carbide1/4in Shank. Angle A = 90° D = 6.3 mmC = 12.7 mm

    Learn More
  14. 3/10 x 1/4 TCT Two Flute Cutter 3.2mm x 11mm
    £13.99 Excl. VAT £16.79 Incl. VAT

    C = 11 mmD = 3.2 mm 1/8 in

    Learn More
  15. 3/02 x 1/4 TCT Two Flute Cutter 6.3mm x 19mm
    £17.07 Excl. VAT £20.48 Incl. VAT

    C = 19 mmD = 6.3 mm 1/4in

    Learn More
  16. 3/20 x 1/4 TCT Two Flute Cutter 6.3mm x 16mm
    £16.61 Excl. VAT £19.93 Incl. VAT

    C = 16 mmD = 6.3 mm 1/4 in

    Learn More
  17. 3/03 x 1/4 TCT Two Flute Cutter 4.5mm x 11mm
    £16.61 Excl. VAT £19.93 Incl. VAT

    C = 4.5 mmD = 11 mm

    Learn More
  18. 3/01 x 1/4 TCT Two Flute Cutter 4.0mm x 11mm
    £15.59 Excl. VAT £18.71 Incl. VAT

    C = 11 mmD = 4.0 mm 5/32

    Learn More

Back top top

1-18 of 29

  1. Page 1 of 2
Contact Us