Hand Tools

Back top top

1-18 of 781

  1. Page 1 of 44
  1. FatMax® T Handle Ratchet Power Key Set of 43
    £32.93 Excl. VAT £39.52 Incl. VAT

    Stanley 0-96-222 FatMax® T Handle powerful professional ratchet handle for rapid tightening and loosening of all fastener

    Learn More
  2. TLM 65 Laser Measure 20m
    £45.06 Excl. VAT £54.07 Incl. VAT

    The Stanley Intelli Tools TLM 65 Laser Measure can measure length, area and volume up to 20m. With both metic and imperial

    Learn More
  3. SWB14 Auto Adjustable Wrench - Plated 350mm (14in)
    £39.72 Excl. VAT £47.66 Incl. VAT

    Silver finish.Size: 350mm (14in).Capacity: 76mm.

    Learn More
  4. M141 Corner Clamp 100mm (4in)
    £42.56 Excl. VAT £51.07 Incl. VAT

    IRWIN Record M141 Corner Clamp. Capacity: 100mm (4in).

    Learn More
  5. Constant Swing 150L Tube Cutter Copper 35mm Capacity 66737
    £32.46 Excl. VAT £38.95 Incl. VAT

    RIDGID 66737 Constant Swing 150L Tube Cutter Std. Wheel: E-3469.Capacity: 3-35mm (1/8 - 1.3/8in).Weight: 0.44kg.

    Learn More
  6. Supreme Long Snipe Nose Smooth Jaw Pliers 132mm
    £36.20 Excl. VAT £43.44 Incl. VAT

    Lindstrom 7890 Supreme Flat Nose Pliers are produced from high performance tool steel. These holding pliers have a screw

    Learn More
  7. Swivel Handle 450mm 1/2in Drive
    £31.32 Excl. VAT £37.58 Incl. VAT

    The Britool BRIE032804B 1/2 inch hinged handle features a bi-material ergonomic handle and a high chrome finish. Dimensions:Length:

    Learn More
  8. A3000PZ Hyperformance Piezo Ignition Blowlamp with Gas
    £30.08 Excl. VAT £36.10 Incl. VAT

    The Campingaz A3000PZ Hyperformance Blowlamp with Piezo Ignition that allows effortless upside down working, with under 5

    Learn More
  9. Pipe Cutter No 3 TC3
    £48.29 Excl. VAT £57.95 Incl. VAT

    Monument pipe cutter number 3 is a high quality tool for use by professional and DIY plumbing Installers, heating engineers,

    Learn More
  10. Heavy-Duty Screw Feed No.15 Tubing and Conduit Cutter 28mm Capacity 32925
    £44.20 Excl. VAT £53.04 Incl. VAT

    RIDGID Heavy-Duty Screw Feed No.15 Tubing and Conduit Cutter Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: E-1240.Weight:

    Learn More
  11. 35S Stainless Steel Tube Cutter 5-35mm Capacity 29963
    £44.46 Excl. VAT £53.35 Incl. VAT

    Designed for optimised performance on stainless steel tube, the Ridgid 35S cutter has six individual bearings, which replace

    Learn More
  12. Screw Feed No.10 Heavy-Duty Tubing and Conduit Cutter 25mm Capacity 32915
    £35.61 Excl. VAT £42.73 Incl. VAT

    RIDGID Screw Feed No.10 Heavy-Duty Tubing and Conduit Cutter Capacity: 3-25mm (1/8 - 1in).Std. Wheel: E-1240.Weight: 0.40kg.

    Learn More
  13. VDE Long Bent Snipe Nose Side Cutting Pliers 200mm
    £30.63 Excl. VAT £36.76 Incl. VAT

    These Knipex 26 26 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V

    Learn More
  14. Dial Caliper White Face 0-6in
    £31.89 Excl. VAT £38.27 Incl. VAT

    The MW141-15L Dial Caliper has the following specification: Range: 0-6in.Resolution: 0.001in.

    Learn More
  15. No.60.1/2 Block Plane + Pouch
    £35.14 Excl. VAT £42.17 Incl. VAT

    This 60 1/2 Block Plane features a low angle cutter seat at 13.5° and is fully adjustable for depth-of-cut, cutter alignment

    Learn More
  16. Socket Set of 16 TORX 1/2in Drive
    £44.77 Excl. VAT £53.72 Incl. VAT

    The Britool 1/2in Drive 16 piece Torx bit set is supplied in a case with metal clasps which also converts into a modular

    Learn More
  17. Crow Ring Spanner 1/2in Drive 30mm
    £46.48 Excl. VAT £55.78 Incl. VAT

    Stahlwille Crow Ring Spanner 1/2in Drive. Size: 30mm.

    Learn More
  18. Socket Set of 16 Metric 1/2in Drive
    £37.24 Excl. VAT £44.69 Incl. VAT

    The Britool 1/2in Drive 16 piece metric socket set consisting of: 16 x 1/2in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17,

    Learn More

Back top top

1-18 of 781

  1. Page 1 of 44
Contact Us